Professional plumber in Atlanta, GA

Upon receiving a service call, I addressed a dual issue involving an outdated toilet and unstable water pressure. The existing toilet was inefficient, and the pressure reducing valve (PRV) was failing to regulate pressure effectively. I began by removing the old toilet and installing a new, high-efficiency model, ensuring it was properly aligned and securely mounted. Next, I replaced the defective PRV valve with a new one, ensuring it was correctly installed to maintain optimal water pressure and protect the plumbing system. After completing the installations, I turned the water supply back on and tested all fixtures to confirm proper pressure and functionality. The new toilet operates flawlessly, and the entire system is now running safely and efficiently, all work completed to code with no leaks.

We addressed a service call for a malfunctioning tankless water heater. Upon inspection, faulty fuses were identified as the root cause. These defective fuses were replaced to restore the unit's functionality. Post-repair, the system was thoroughly tested and confirmed to be operating correctly. To prevent future issues, we recommended a comprehensive flush of the tankless water heater to eliminate buildup and suggested a licensed electrician inspect the power supply for potential surges. The unit is now operating reliably.

We successfully replaced an existing water heater with a new 50-gallon electric unit. The old heater was carefully removed, and the new unit was installed to ensure reliable hot water supply. A new shutoff valve and drain pan were added to enhance safety and accessibility, and to meet code compliance. The system was rigorously tested post-installation to confirm proper operation and performance. The home now enjoys consistent hot water, and no leaks were observed. This service also includes a $285 discount if completed within thirty days of delivery.

I successfully replaced a malfunctioning fill valve in a toilet. Upon inspection, the fill valve was identified as the source of the problem, preventing proper water level control. The old valve was carefully removed and replaced with a new, high-quality component. Post-installation, I conducted thorough testing to confirm consistent refilling and proper operation. The toilet now functions correctly, with no leaks or issues detected.

We addressed a service call for a malfunctioning sewage ejector pump. The old unit was carefully removed and replaced with a new sewage ejector pump to restore proper drainage and system efficiency. A new ball check valve combo was installed to prevent backflow and ensure reliable operation. Post-installation, the system underwent rigorous testing, confirming it was functioning correctly with no issues detected. This upgrade includes a one-year parts and labor warranty, providing peace of mind. Our team ensured the job was completed to the highest standards.

We addressed a service call to reset a toilet and perform additional plumbing work in a bathroom. The toilet was carefully removed, and the flange was securely fastened to the floor to ensure a stable connection. A new wax ring was installed, and the toilet was reset, followed by sealing with caulking for a clean, hygienic finish. We also tackled the lavatory sink drain, installing a new bathroom faucet to enhance both functionality and aesthetics. Each fixture was thoroughly tested post-installation, confirming proper operation and the absence of leaks. Our meticulous attention to detail ensured a seamless and professional job completion.

We addressed multiple leaks on a CPVC water line at the main water loop near the water heater. The damaged sections were carefully cut out and replaced with code-approved materials to ensure a durable and reliable repair. Additionally, we replaced the main water shutoff valve and installed a new pressure reducing valve to enhance system control and safeguard the plumbing from high water pressure. After completing the repairs, we conducted a thorough system test, confirming proper operation and the absence of any leaks.

Water heater repipe and expansion tank replacement completed in Atlanta. We performed a full repipe on the water heater system, including replacing expansion tanks and shutoff valves. The new expansion tank was properly installed and securely supported to ensure long term performance and safety. In addition, we completed the replacement of a dual water heater system serving the master suite, installing new equipment and fixtures to improve efficiency and reliability. As part of the standard installation, we also reworked the nursery water heater system and replaced outdated plastic boiler drains on the left side of the home. New piping and fittings were provided and professionally installed. After completion, the system was thoroughly tested and confirmed to be operating properly with no leaks observed. Keywords: water heater repair Atlanta, expansion tank replacement Atlanta, water heater repipe Atlanta, dual water heater installation Atlanta, plumber Atlanta GA

A clogged toilet was addressed with precision. Using a professional hand auger, the obstruction was safely broken through and removed. Post-cleaning, the toilet was tested multiple times to confirm proper flushing and drainage. The toilet now operates smoothly, with no signs of backups or issues. This thorough approach ensures lasting resolution and peace of mind for the customer.

We successfully completed a tub and shower trim upgrade, enhancing the fixture's appearance and functionality. By replacing various components like handles, spouts, and showerheads, we modernized the bathroom without needing a full faucet replacement. Each part was meticulously installed and tested, ensuring smooth operation and no leaks. This cost-effective solution keeps the existing valve intact while providing a fresh, updated look.

We swiftly addressed an emergency involving a burst water supply line for an upstairs toilet. The damaged section was precisely located and isolated to prevent further water damage. The old piping was removed and replaced with new materials, ensuring a professional repair. After the repair, the water system was restored and tested for functionality. No leaks were detected, and the plumbing system is now fully operational.

A faulty ballcock was causing issues with the toilet's water level, leading to a running toilet and inconsistent flushing. To address this, I replaced the defective ballcock with a new, reliable toilet fill valve. This repair ensures the tank fills correctly after each flush, eliminating continuous water flow and preventing increased water bills. The new fill valve was installed, and the system was thoroughly tested to confirm proper function and no leaks. This repair restores the toilet's efficiency and reliability.

A service call was received for a suspected water leak. Upon inspection, a dry area was found in the upstairs laundry room, with no active leak detected. The client was advised to monitor the area for changes. If the issue worsens, a follow-up visit is necessary. Further investigation, such as inspecting the main floor kitchen ceiling, would require additional labor and materials.

We installed a new outdoor faucet, also known as a sillcock or garden valve, to ensure reliable water access for everyday use. This involved securely connecting the faucet to the water supply line and testing for proper operation and leaks. For homeowners in colder climates, we recommended upgrading to a frost-free outdoor faucet to prevent pipes from freezing and bursting. Our work guarantees a seamless and efficient outdoor water access solution.

I successfully installed a new 18-inch water heater, ensuring it was securely mounted and ready for use. New piping and fittings were installed to meet safety standards, and an expansion tank was added to prevent pressure build-up. Each component was meticulously connected, and thorough testing confirmed everything was functioning correctly, providing a reliable and efficient system.

I successfully removed the existing leaking water heater and installed a new 40-gallon unit, ensuring optimal performance and safety. Additionally, I supplied and installed a new expansion tank to prevent pressure build-up and potential damage. All necessary piping and fittings were replaced to meet code compliance and ensure efficient operation. After installation, I conducted a thorough system startup and testing process, including turning on the water supply to verify proper function and confirm there were no leaks. The new water heater comes with a 7-year manufacturer’s warranty, providing peace of mind for future use.

I began by carefully removing the old kitchen faucet, ensuring all components were safely set aside. Next, I installed the new faucet provided by the customer, making sure all connections were secure and precise. Following this, I reinstalled the existing garbage disposal, ensuring it was properly aligned and connected to the plumbing. After turning the water back on, I thoroughly tested for any leaks and confirmed that the faucet and disposal were operating correctly. The job was completed efficiently, with all systems functioning as expected.

Technician responded to a service call reporting water gushing from underneath the kitchen sink. Inspection Findings: Upon investigation, it was determined that a CPVC pipe located beneath the kitchen sink had failed. The pipe exhibited signs consistent with deterioration from age and general wear over time, resulting in a break that allowed water to discharge into the cabinet area. Work Performed: The damaged section of CPVC piping was removed. The affected line was then properly capped to stop water flow and secure the plumbing system.

I performed a thorough maintenance service on a tankless water heater, including a comprehensive flush to ensure optimal performance and longevity. Additionally, I installed a new downspout system to enhance drainage efficiency and prevent water damage. The installation was precise, ensuring that the downspout was securely connected and properly directed to avoid any potential issues.

During the inspection, it was determined that the existing expansion tank was leaking and not adequately sized for the system. I removed the defective expansion tank and installed a new 4.5-gallon unit. To accommodate the larger tank, I provided and installed new piping and fittings, modifying the T&P valve drain line. After completing the installation, I turned the water supply back on and tested the system to ensure proper operation. I verified that everything was functioning correctly and confirmed that no leaks were present at the time of completion.