Reliable plumber in Roswell, GA

Upon arrival, I addressed a clog affecting the upstairs bathroom toilet and both lavatory sinks. I began by removing the toilet to access the drain line, then snaked it approximately 70 feet to clear the blockage. Next, I cleared the lavatory sink drains. For the toilet, I replaced the old flapper and fill valve with new ones. After ensuring the drain was clear, I installed a new wax seal and reinstalled the toilet securely. I then turned the water supply back on and tested the toilet and lavatory drains for proper flow. Finally, I verified that all fixtures were operating correctly with no leaks present.

Upon arrival, I addressed a leaking toilet with heavily rusted bolts. I removed the rusted bolts, detached the toilet from the flange, and disposed of the old wax seal. New bolts and a wax ring were installed, and the toilet was securely reattached. Additionally, I replaced the old toilet fill valve with a new one. For the kitchen sink, I removed the old faucet and shut-off valves, then installed a new Moen faucet and shut-off valves. Water supply was restored, and all fixtures were tested for proper operation and no leaks.

I recently completed a successful service call where I addressed a complex plumbing issue. Upon arrival, I conducted a thorough inspection and identified a significant blockage in the main drain. Using specialized tools, I carefully removed the obstruction and ensured the pipes were clear. I also performed a routine maintenance check on the water heater and replaced a faulty valve. The client was very satisfied with the swift and efficient resolution of their problem.